Genie S-65 Service And Repair Manual page 26

September 2016
Deutz D2011 L03i Engine, continued
Fuel injection system
Injection pump make
Injection pump pressure,
maximum
Injector opening pressure
Fuel requirement
For fuel requirements, refer to the engine Operator
Manual for your engine.
Starter motor
Current draw, normal load
Brush length, new
Brush length, minimum
Battery
Type
Quantity
Cold cranking ampere
Reserve capacity @ 25A rate
Alternator output
Fan belt deflection
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice or obligation.
Part No. 1268492 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC
Bosch
15000 psi
1034 bar
3046 psi
210 bar
140A to 200A
0.72 in
18.5 mm
0.27 in
7 mm
12V DC, Group 34/78
1
1000A
200 minutes
60A @ 14V DC
3/8 to 1/2 inch
9 to 12 mm
Service and Repair Manual
Specifications
9