Genie S-65 Service And Repair Manual page 110

September 2016
5 Remove the backlash pivot plate mounting
bolts. Carefully remove the drive hub
assembly from the machine.
Crushing hazard. The turntable
could rotate unexpectedly when
the rotation drive hub assembly
is removed if the turntable is not
secured with the turntable
rotation lock pin.
Crushing hazard. The turntable
rotation assembly could become
unbalanced and fall when
removed from the machine if not
properly supported by the
overhead crane.
When installing the drive hub assembly:
6 Install the drive hub. Torque the back lash
pivot plate to specification. Refer to
Specifications, Machine Torque
Specifications.
7 Adjust turntable rotation gear backlash. Refer
to Repair Procedure, How to Adjust the
Turntable Rotation Gear Backlash.
Part No. 1268492 S-60 • S-65 • S-60 TRAX • S-65 TRAX • S-60 HC • S-60X • S-60XC
Turntable Rotation Components
How to Adj ust the Tur ntabl e R otati on Gear Backlash
Service and Repair Manual
93