Adf Controller Card Removal; Adf Document Tray Assembly Removal - Lexmark X792 Service Manual

ADF controller card removal

See "ADF electronics" on page 7-24
1.
Remove the ADF rear cover. See
2.
Disconnect all cables attached to the controller card.
3.
Remove the four screws (A), and remove the ADF controller card.

ADF document tray assembly removal

See "ADF electronics" on page 7-24
1.
Remove the ADF front cover. See
2.
Remove the ADF rear cover. See
3.
Remove the two screws (A) from the top of the ADF document tray assembly.
4.
Slide the ADF document tray assembly to the right of the printer to access the cables.
Note: If you are removing the ADF document tray assembly to access another component, then stop here and
do not disconnect the cables.
5.
Disconnect the two cables connected to the tray to remove the tray assembly.
for the part number.
"ADF rear cover removal" on page
for the part number.
"ADF front cover removal" on page
"ADF rear cover removal" on page
4-149.
4-149.
4-149.
Repair information
7562
4-153