Sfp Stapler Assembly Sensor (Finisher Bin Media Present) Removal - Lexmark T650 Service Manual

4062-XXX
4. Remove the LED sensor cover.

SFP stapler assembly sensor (finisher bin media present) removal

"SFP stapler assembly LED sensor cover removal" on
1. Remove the LED sensor cover. Go to
page 4-176.
2. Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3. Remove the harness connected to the media bin present sensor.
4. Remove the sensor (finisher bin media present).
4-177
Repair Information