Table of Contents
Advertisement
•
From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact customer support at
http://support.lexmark.com
message and continue printing.
Maintenance kit nearly low [80.xy]
For more information, contact customer support at
representative. If necessary, touch Continue to clear the message and continue printing.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact customer support
at
http://support.lexmark.com
message and continue printing.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, touch Cancel job to clear the message.
•
Install additional printer memory.
Memory full, cannot print faxes
From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt
to print after the printer is restarted.
Memory full, cannot send faxes
1
From the printer control panel, touch Continue to clear the message and cancel the fax job.
2
Try one or more of the following:
•
Reduce the fax resolution, and then resend the fax job.
•
Reduce the number of pages in the fax, and then resend the fax job.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, touch Continue to continue printing.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, contact customer
support.
or your service representative. If necessary, touch Continue to clear the
http://support.lexmark.com
or your service representative. If necessary, touch Continue to clear the
Diagnostic information
116
7016
or your service
Advertisement
Table of Contents
