Power On/Off Slide Switch Sw1; Switches - Xilinx VCU118 User Manual

Switches

[Figure 2-1, callouts 27, 30]
The VCU118 evaluation board includes a power on/off slide switch and a configuration
pushbutton switch:
• Power on/off slide switch SW1 (callout 30)
• FPGA Program_B SW4, active-Low (callout 27)

Power On/Off Slide Switch SW1

[Figure 2-1, callout 30]
The VCU118 board power switch is SW1. Sliding the switch actuator from the off to on
position applies 12VDC power from the 6-pin mini-fit power input connector J15. Green
LED DS20 illuminates when power is available at the VCU118 power connector J15, and
DS26 illuminates when the VCU118 board power switch is on. See
System for details on the onboard power system.
Do NOT plug a PC ATX power supply 6-pin connector into J15 on the VCU118 evaluation
CAUTION!
board. The ATX 6-pin connector has a different pinout than J15. Connecting an ATX 6-pin connector
into J15 damages the VCU118 evaluation board and voids the board warranty.
VCU118 Board User Guide
UG1224 (v1.0) December 15, 2016
Chapter 3: Board Component Descriptions
www.xilinx.com
VCU118 Board Power
91
Send Feedback