Ethernet Phy Status Leds; Vcu118 Ethernet Phy Status Leds - Xilinx VCU118 User Manual

Ethernet PHY Status LEDs

[Figure 2-1, callout 20]
Two Ethernet PHY status LEDs are integrated into the metal frame of the J10 RJ-45
connector. These LEDs are visible on the left edge of the VCU118 board when it is installed
into a PCIe slot in a PC chassis. The two PHY status LEDs are visible within the frame of the
RJ45 Ethernet jack as shown in
LED is the link activity indicator, the right green LED is the 1000BASE-T link mode indicator.
X-Ref Target - Figure 3-16
A separate discrete LED on top of the board (DS27) indicates link established.
Details about the tri-mode Ethernet MAC core are provided in Tri-Mode Ethernet MAC
LogiCORE IP Product Guide (PG051)
on the TI website
VCU118 Board User Guide
UG1224 (v1.0) December 15, 2016
Figure 3-16. As viewed from the front opening, the left green
Figure 3-16: VCU118 Ethernet PHY Status LEDs
[Ref
[Ref 25].
www.xilinx.com
Chapter 3: Board Component Descriptions
9]. The TI DP83867ISRGZ data sheet can be found
X17994-121416
Send Feedback
79