Table of Contents
Advertisement
1.
MOUNTING
1.1
Installation of Multi Function Display
The TZT22X/24X is designed to be mounted in a console or panel.
The installer of this equipment must read and follow the descriptions in this manual.
Wrong installation or improper maintenance can void the warranty.
1.1.1
Mounting considerations
When selecting a mounting location for TZT22X/24X, keep the following in mind:
• The temperature at the mounting location shall be between -15°C and +55°C.
• The humidity at the mounting location shall be 93% or less at 40°C.
• Locate the unit away from exhaust pipes and ventilators.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal (compliant with IEC 60945
Ed.4).
• Keep the unit away from electromagnetic field generating equipment such as
motors and generators.
• For maintenance and checking purposes, leave sufficient space around the unit and
leave slack in cables. Minimum recommended maintenance space is shown in the
outline drawing for the display units.
• A magnetic compass will be affected if the equipment is placed too close to it.
Observe the compass safe distances shown in "SAFETY INSTRUCTIONS" to
prevent disturbance to the magnetic compass.
• In the below cases, use the supplied mounting plates to reinforce the mounting lo-
cation.
• When removing and installing this unit repeatedly.
• When replacing from another NavNet TZT unit to this unit.
1-1
Advertisement
Table of Contents
