Advertisement
2
.
DISPLAY UNIT
Mounting Considerations
The display unit can be mounted on a tabletop, on the overhead,
or in a panel. Install the unit where the LCD can be easily viewed
and the keyboard can be easily operated. Be sure to leave
sufficient space on the sides and the rear of the unit for
maintenance purposes. Leave sufficient slack in cables so the unit
can be dismounted from the hanger with the connectors connected.
In addition to the aforementioned points, observe the following
precautions.
• Keep the display unit out of direct sunlight or at least shaded to
maintain display tone and because of heat that can build up
inside the cabinet.
• The ambient temperature and humidity change should be
moderate and stable.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• The fuse holder in the power cable is waterproof to
specification IEC529 IPX-2. Locate the power cable away
from water splash.
Mounting
Mount the unit by referring to the drawing on page D-2 thru D-4.
FLUSH MOUNT
FLUSH MOUNT
(S-TYPE)
(F-TYPE)
Figure 1 Display unit mounting methods
7
Advertisement
