Item No.
U030
Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Feed
DLP(K)
DLP(CMY)
Fuser
SB(CW)
SB(CCW)
CMY Release
Job Separator
Regist
Bridge1
Bridge2
Belt Meand
Press Release
Fuser Release
DU1
DU2
Mid Roller
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Paper feed motor (PFM) is turned on
Developer motor K (DEVM-K) is turned on
Developer motor MCY (DEVM-MCY) is turned on
Fuser motor (FUM) is turned on
Eject motor (EM) is turned on clockwise
Eject motor (EM) is turned on counterclockwise
Color release motor (CRM) is turned on
Job eject motor (JEM) is turned on
Registration motor (RM) is turned on (45 ppm/55 ppm model only)
Bridge conveying motor 1 (BRCM1) is turned on
Bridge conveying motor 2 (BRCM2) is turned on
Transfer motor (TRM) is turned on
Transfer release motor (TRRM) is turned on
Fuser release motor (FURM) is turned on
Duplex motor 1 (DUM1) is turned on
Duplex motor 2 (DUM2) is turned on
Middle motor (RM) is turned on (45 ppm/55 ppm model only)
Description
Description
1-3-30
2LK/2LN/2LM/2LC