Kyocera TASKalfa 3050ci Service Manual page 235

Item No.
U952 Method: [Execute(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Execute(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Press the start key.
Executes maintenance modes defined in a workflow in sccession.
Method: [Entry(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Entry(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Select the work flow save area.
Data1 - 6
8. Select [Execute].
Exports a workflow housed in a USB flash device to the machine.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Workflow data in the USB flash device
Display
Workflow data in the USB flash device
Display
The area to store workflows in the machine
Description
Description
Description
Description
1-3-193
2LK/2LN/2LM/2LC