Detaching And Reffiting The Transfer Roller - Kyocera TASKalfa 3050ci Service Manual

(3) Detaching and reffiting the transfer roller

Procedure
1. Pull out the conveying unit.
2. Loosen two fixed screws on the TC
guide.
3. Remove the stop ring.
4. Unhook the hook and remove the TC
gear Z29R.
5. Remove two bearings.
6. Remove the transfer roller.
Figure 1-5-70
Transfer roller (shaft)
Bearing
TC gear Z29R
Hook
TC guide
Screw
TC guide
TC guide
Figure 1-5-71
1-5-43
2LK/2LN/2LM/2LC
Conveying unit
Bearing
Transfer roller (shaft)
Transfer roller
Screw
Stop ring