Setting The Offset For The Color Balance - Kyocera TASKalfa 3050ci Service Manual

Item No.
U429

Setting the offset for the color balance

Description
Displays and changes the density for each color during copying in the various image quality
modes.
Purpose
To change the balance for each color.
Method
1. Press the start key.
2. Select the image quality mode.
Text+Photo
Photo
Photo/Printout
Text
Graphics/Map
Copy/Printout
Setting
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
C
M
Y
K
*: When selecting [Copy/Printout]
Increasing the value darkens the density and decreasing it lightens the density.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Density of each color in the text & photo mode
Density of each color in the photo mode
Density of each color in the printed photo mode
Density of each color in the text mode
Density of each color in the map mode
Density of each color in the printed document mode
Description
Value of the cyan setting
Value of the magenta setting
Value of the yellow setting
Value of the black setting
Description
Description
-5 to 5 (0 to 10*)
-5 to 5 (0 to 10*)
-5 to 5 (0 to 10*)
-5 to 5 (0 to 10*)
1-3-167
2LK/2LN/2LM/2LC
Setting range
setting
0
0
0
0
Initial