(7) Detaching and refitting the hard disk unit
Procedure
1. Perform maintenance mode U917
(backup data reading) (see page 1-3-
186).
2. Remove the rear upper cover (see page
1-5-65).
3. Release the wire saddle.
4. Remove two screws.
5. Unhook two hooks and pull out the
HDD bracket a little.
Screws
Wire saddle
Figure 1-5-139
Hook
Hook
HDD bracket
Figure 1-5-140
1-5-87
2LK/2LN/2LM/2LC