Transfer Section; Detaching And Refitting The Conveying Unit - Kyocera TASKalfa 3050ci Service Manual

1-5-5 Transfer section

(1) Detaching and refitting the conveying unit

Procedure
1. Pull the conveying unit out.
2. Remove three screws.
3. Unhook three hooks and then remove
the right front cover.
4. Unhook two hooks and then remove the
conveying inner cover from the convey-
ing unit.
Conveying unit
Right front cover
Right front
cover
Conveying unit
Hook
Conveying inner cover
1-5-39
2LK/2LN/2LM/2LC
Screw
Screw
? 1?5?64
Hook
Figure 1-5-65
Hook
Hook
Hook