Kyocera TASKalfa 3050ci Service Manual page 213

Item No.
U464 Setting: [Print Rate(B/W)]
1. Change the setting value using the +/- keys or numeric keys.
Display
Threshold
2. Press the start key. The value is set.
Method: [Calib]
1. Select [Execute].
2. Press the start key. Calibration is executed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U465 Data reference for ID correction
Description
References the data related to ID correction.
Purpose
To check the corresponding data.
Method
1. Press the start key.
2. Select the item to be reference.
TCONT
Laser Power
Bias Calib
T7 CTD
Displaying: [TCOUNT]
1. Select [TCOUNT]. The current value is displayed.
Before(C)
Before(M)
Before(Y)
Before(Y)
After(C)
After(M)
After(Y)
After(K)
Proportion of black/white printing
Display
Developer bias control value after ID correction
Scaling factor to the value determined in light amount calibration
Sensor value for toner thick layer calibration
T7 control value
Display
Developer bias control value for cyan before ID correction
Developer bias control value for magenta before ID correction
Developer bias control value for yellow before ID correction
Developer bias control value for black before ID correction
Developer bias control value for cyan after ID correction
Developer bias control value for magenta after ID correction
Developer bias control value for yellow after ID correction
Developer bias control value for black after ID correction
Description
Description
Description
Description
1-3-171
2LK/2LN/2LM/2LC
Setting Initial
range setting
0 to 100 (%) 50