Checking The Operation Of The Solenoids; Adjusting The Print Start Timing - Kyocera TASKalfa 3050ci Service Manual

Item No.
U033

Checking the operation of the solenoids

Description
Turns each solenoid on.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key.
2. Select the solenoid to be operated.z
3. Press the start key. The operation starts.
Pick Up1
Pick Up2
Job Separator
ID Clean
Bridge Solenoid
Motor
*: 45 ppm/55 ppm model only.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U034

Adjusting the print start timing

Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and
original.
Make the adjustment if there is a regular error between the center lines of the copy image and
original.
Method
1. Press the start key.
2. Select the item to be adjusted.
LSU Out Top
LSU Out Left
LSU Out Top B/W
LSU Out Top 3/4
Display
Pickup solenoid 1 (PUSOL1)
Pickup solenoid 2 (PUSOL2)
Feedshift solenoid (FSSOL) is turned on
Cleaning solenoid (CLSOL) is turned on
Bridge solenoid (BRSOL) is turned on
Paper feed motor (PFM) is turned on
Display
Leading edge registration adjustment
Center line adjustment
Leading edge registration adjustment in black/white mode
Leading edge registration adjustment at 3/4 times of line speed
Description
Description
is turned on
*
is turned on
*
Description
1-3-33
2LK/2LN/2LM/2LC