Setting The Color Registration Adjustment - Kyocera TASKalfa 3050ci Service Manual

Item No.
U467

Setting the color registration adjustment

Description
Sets the color registration adjustment and transfer belt speed correction. Also, determines the
conditions by which color registration correction is executed depending on the LSU temperature.
Purpose
If color variance is uneven due to a sensor failure, etc., turn this off and temporarily make a man-
ual adjustment.
Method
1. Press the start key.
2. Select the item to be set.
Color Regist
Belt Speed
Timing
Setting: [Color Regist]
1. Select On or Off.
On
Off
Initial setting: On
2. Press the start key. The setting is set.
Setting: [Belt Speed]
1. Select On or Off.
On
Off
Initial setting: On
2. Press the start key. The setting is set.
Setting: [Timing]
1. Change the setting value using the +/- keys or numeric keys.
Display
Timing
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Setting the color registration correction operation
Setting the transfer belt speed correction operation
After the previous correction is executed, color registration is
compensated as the LSU temperature varies by the value
determined.
Display
Enables the color registration correction operation.
Disables the color registration correction operation.
Display
Enables the transfer belt speed correction operation.
Disables the transfer belt speed correction operation.
Conditions for execution depending on
the LSU temperature variation
Description
Description
Description
Description
Description
1-3-173
2LK/2LN/2LM/2LC
Setting Initial
range setting
2 to 10 10