Switching Between Duplex/Simplex Copy Mode; Setting The Value For Maintenance Due Indication - Kyocera TASKalfa 3050ci Service Manual

Hide thumbs Also See for TASKalfa 3050ci:

Table of Contents

Switching between duplex/simplex copy mode

Switches the initial setting between duplex and simplex copy.

To be set according to frequency of use: set to the more frequently used mode.

1. Press the start key.

2. Select On or Off.

Initial setting: Off

3. Press the start key. The setting is set.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Sets when to display a message notifying that the time for maintenance is about to be reached,

by setting the number of copies that can be made before the current maintenance cycle ends.

When the difference between the number of copies of the maintenance cycle and that of the

maintenance count reaches the set value, the message is displayed.

To change the time for maintenance due indication.

1. Press the start key.

2. Change the setting using the +/- keys or numeric keys.

3. Press the start key. The value is set.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Simplex copy

Time for maintenance due indication

(Remaining number of copies that can be made

before the current maintenance cycle ends)

2LK/2LN/2LM/2LC

Show Quick Links

Table of Contents