Switching Between Double And Single Counts - Kyocera TASKalfa 3050ci Service Manual

Item No.
U253

Switching between double and single counts

Description
Switches the count system for the total counter and other counters for every color mode.
Purpose
Used to select, according to the preference of the user (copy service provider), if A3/Ledger
paper is to be counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the item to set.
Full Color
Mono Color*
B/W
Displayed only if the setting of U276 (Setting the copy count mode) is Mode1.
3. Select the count system.
SGL(All)
DBL(A3/Ledger)
DBL(B4)
DBL(Folio)
Initial setting: DBL(A3/Ledger)
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Count system of full color mode
Count system of single color mode
Count system of black/white mode
Display
Single count for all size paper
Double count for A3/Ledger size or larger
Double count for B4 size or larger
Double count for Folio size or larger
Description
Description
Description
1-3-134
2LK/2LN/2LM/2LC