Unlocking the developer waste
1. Press the stopper in four positions and
rotate.
2. Remove a screw and slide the lever
right wards.
3. Fix the lever using the screw previously
removed at the right screw hole and
unlock the developer waste.
*: If the machine is moved after installation,
lock the developer waste.
*: Failure to perform locking could result in
leakage of developing power.
[State of lock]
2
Stopper
[Locked]
2
1
Screw
Lever
1-2-12
2LK/2LN/2LM/2LC
[State of release]
1
Stopper
Figure 1-2-16
[Released]
Lever
Figure 1-2-17
3
Screw