Kyocera TASKalfa 3050ci Service Manual page 41

7. Make test copies.
If image quality is unsatisfactory after test copying, execute Color Calibration, then retry U410-Adjusting
the halftone automatically.
8. Setting the delivery date (see page 1-3-137)
Enter 278 using the numeric keys and press the start key.
Select [Today].
Press the start key. The delivery date is set.
Press the stop key to exit.
9. Output status report
Use the numeric keys to enter 000 and press the start key.
Select [Maintenance].
Press the start key. A status report is output.
Press the stop key to exit.
10. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion of the machine installation
1-2-17
2LK/2LN/2LM/2LC