Adjusting Original Size Detection - Kyocera TASKalfa 3050ci Service Manual

Item No.
U093 Setting: [Fax Text/Fax Photo]
1. Select the item to be set.
2. Change the setting value using the +/- or numeric keys.
Display
Darker
Lighter
Increasing the setting makes the change in density larger, and decreasing it makes the
change smaller.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U099

Adjusting original size detection

Description
Checks the operation of the original size sensor and sets the sensing threshold value.
Purpose
To adjust the sensitiveness of the sensor and size judgement time if the original size sensor mal-
functions frequently due to incident light or the like.
Method
1. Press the start key.
2. Select the item.
Data1
B/W Level1
Data2
Method: [Data1/Data2]
1. Place the original and close the original cover or DP. The detection sensor transmission data
is displayed.
Original Area R
Original Area G
Original Area B
Original Area
Size SW L
Gradient for darker setting
Gradient for lighter setting
Display
Displaying original size sensor transmission data
B/W LEVEL setting original size sensor threshold value
Setting original size judgment time
Displaying original size sensor transmission data
(when DP is installed)
Display
Detected original width size (R)
Detected original width size (G)
Detected original width size (B)
Detected original width size
Displays the original size sensor (OSS) ON/OFF
Description
Description
Description
Description
1-3-68
2LK/2LN/2LM/2LC
Setting Initial
range setting
0 to 3 0
0 to 3 0