Install The Original Platen Or Dp (Option); Install Other Optional Devices; Install The Cassette Heater (Option); Connect The Power Cord - Kyocera TASKalfa 3050ci Service Manual

3. Remove the operation panel sheet.
4. Replace the operation panel sheet of
the corresponding language.
5. Refit the clear panel.
6. Refit the operation panel covers A and
B.

Install the original platen or DP (option)

1. Install optional original platen or DP.

Install other optional devices

1. Install the optional devices (job separa-
tor, document finisher and/or fax kit
etc.) as necessary.

Install the cassette heater (option)

1. Install the optional cassette heater as
necessary.

Connect the power cord

1. Connect the power cord to the power
cord connector on rear lower of the
machine.
2. Connect the power plug to the wall out-
let.
Operation
panel sheet
Figure 1-2-21
1-2-15
2LK/2LN/2LM/2LC