U467 Setting The Color Registration Adjustment - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7-1
Maintenance
item No.
Setting the color registration adjustment
U467
Description
Sets the color registration adjustment and transfer belt speed correction. Also, determines the conditions by
which color registration correction is executed depending on the LSU temperature.
Purpose
If color variance is uneven due to a sensor failure, etc., turn this off and temporarily make a manual adjust-
ment.
Method
1. Press the start key.
2. Select the item to be set.
Display
Color Regist Adjustment
Transfer Belt Speed Adj.
Set Timing
Setting: [Color Regist Adjustment]
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.
Setting: [Transfer Belt Speed Adj.]
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.
Setting: [Set Timing]
1. Change the setting value using the +/- or numeric keys.
Display
TIMING
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-124
Description
Description
Setting the color registration correction operation
Setting the transfer belt speed correction operation
After the previous correction is executed, color registration is com-
pensated as the LSU temperature varies by the value determined.
Description
Enables the color registration correction operation.
Disables the color registration correction operation.
Description
Enables the transfer belt speed correction operation.
Disables the transfer belt speed correction operation.
Description
Conditions for execution depending on the
LSU temperature variation
Setting range Initial setting
2 to 10 2