Adjustment/Maintenance; Overview Of Adjustment/Maintenance; Color Registration Procedure - Kyocera 1102R73AS0 Operation Manual

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

Overview of Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run
Adjustment/Maintenance in the system menu.
The table below lists the item you can Procedure.
Item

Color Registration Procedure

Drum Refresh
Calibration
Laser Scanner Cleaning

Color Registration Procedure

When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to
correct the color position of each of cyan, magenta and yellow to resolve color drift.
Auto registration and manual registration are available for Color Registration. Color drift can be largely corrected through
auto registration. However, if it is not resolved or to perform more detailed settings, use the manual registration.
IMPORTANT
Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved
once, however, it may cause the serious color drift later.
Calibration (page 10-34)
Auto Correction
1
Correct the color position to resolve color drift.
Remove image blur and white dots from the printout.
Adjust color drift or hue of printed image in the most appropriate color.
Remove vertical white lines from the printout.
Load paper.
Description
10-29
Reference Page
page 10-29
page 10-34
page 10-34
page 10-34