Data Backup Via Serial Rs232-Interface (Only For C-Versions) - Roland udk20 Manual

R O L A N D
Page 90

7.8 Data backup via serial RS232-interface (only for C-versions)

For better prevention against data loss, a data backup procedure is available for the system configuration
and the parameter sets. This is performed via the RS232-interface (only for C- versions). The secured data
can be tranfered to spare units in case of exchange after a failure.
The data backup is accomplished with the RPP-XP software available from ROLAND (for Win2k, WinXP).
The procedure can be selected in the menu configuration. The following menu is displayed during the data
backup.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Parameter backup
System Param.:12
P12 LW:24-32mS/m
active
Picture: Back-up of the data via RS232 interface
B0048991