General Information Regarding Configuration; Changing, Adjusting Or Checking The Configuration - Roland udk20 Manual

Double sheet detector
Hide thumbs Also See for udk20:
Table of Contents

Advertisement

R O L A N D
Page 76

7.4 General information regarding configuration

Note: The correct configuration depends on the communication with the PLC, on
the measurement task and the attached components.
The following rules apply to the operation in the configuration mode:
The configuration mode is activated (while in measurement mode) by pressing the MENU key.
The configuration mode is completed or aborted by pressing the MENU key.
The selection of parameters or the adjustment of parameters can be changed if these items blink in
the display.
The selection of parameters or parameter adjustment is activated by pressing the ENTER key.

7.5 Changing, adjusting or checking the configuration

In order to select, change or check the system and program parameters, push the MENU key.
The following menu item appears:
This menu option allows the selection between configuration review and configuration change.
Configuration review:
Configuration change:
The following menu item appears.
Every blinking digit can be changed with the arrow keys and confirmed with the ENTER key. After the correct
password has been entered, the following menu appears for the adjustment of the configuration mode. If
the entered password is incorrect then the cursor returns to the first digit of the password and the input must
be repeated. The input of the password can be aborted by pressing the MENU button.
Note: A fault is generated if PLC commands are executed while entering the password or changing
parameters.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Configuration
The system and program parameters cannot be changed. The measurement
mode is not interrupted.
All system and program parameter can be changed after entering the password.
Password
Configuration
program param.
review
4711
Picture: Adjusting the configuration mode
B0048991
Picture: Display of selected menu
Picture: Entering the password

Advertisement

Table of Contents
loading

Table of Contents