R O L A N D
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Page 30
B0048991
Method b)
Meaningful, if the sheets to be monitored by the various sensors have different sheet thicknesses. Also
suitable if the nominal thickness changes from cycle to cycle.
For this procedure the respective parameter set (program) must contain nominal thickness and sensor
number. The selection of the program is then performed by the PLC.
Disadvantage: A Long time is required for switching the program via the parallel interface.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33