Table of Contents
Advertisement
ROLAND
Rev. 1.0
1. Safety instructions and warnings for user
This handbook contains all necessary information for the correct operation of the R1000 family of systems.
It is intended for usage by technically qualified personnel.
Unauthorized tampering with the unit, especially ignoring the warnings in these operating instructions, can
cause malfunction and damage to the unit.
Only authorized personnel may perform changes to the unit and make cable connections (especially the power
supply).
Should measurements within the unit be required (e.g. for service or repair), then all customary accident
prevention procedures must be observed. Only professional electrical tools should be used.
Note: Factory system adjustments, especially the upper and lower limits, are made
to provide optimal machine protection. Deviations from factory adjustments could
impair the protection.
1.1 Intented use
Flexible manufacturing systems in the sheet processing industry require reliable Double Sheet Control
systems, in order to protect presses and other sheet processing machines against damage caused by
feeding multiple sheets.
The Double Sheet Detector R1000 UDK20 was specifically developed for this technical environment.
Depending on the application (type of material, thickness, sensor gap) the UDK20 can be used with one or
more sensors. The reliable function of the Double Sheet Detector depends therefore markedly on the
selection of the correct sensors and the mounting of the sensors.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Page 9
Advertisement
Table of Contents
