Table of Contents
Advertisement
R O L A N D
Rev. 1.0
The UP key leads to the following menu item:
Here the sensor will be de-magnetized.
The UP key leads to the following menu item:
The ENTER key will exit the factor diagnosis section.
Indication of Type of unit, Software version, Hardware version
Here the type of unit, the Software version and the Hardware version will be shown. This indication can also
be called up with the ENTER key in the main menu.
Code:
UDK20 = type of unit
2PW = version 2PW
B-O = version of unit
(2) = 2 sensors connected
SV = software version
HV = hardware version
System parameter 14: indicating the system version.
Note: This factory setting must not be changed !
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
System param.:13
Sensor demagnet.
System param.:13
UDK20-2PW-B-O(2)
SV: 002
Picture: Indicating the type of unit, software version, hardware version
System param.:14
VERSION: BO
Picture: De-magnetizing the sensor
EXIT
Picture: Exiting the factor diagnosis section
HV: 001
Picture: Indicating the system version
Page 83
Advertisement
Table of Contents
