Roland udk20 Manual page 106

Double sheet detector
Hide thumbs Also See for udk20:
Table of Contents

Advertisement

R O L A N D
Page 106
Program operation
Read data from the ROLAND control unit:
-
After selection of the menu point „RPP_Data" > „Read Roland device" data is read from the
control unit. As described previously, the control unit must be in the parameter backup mode and
connected to the PC via a serial interface (COM or USB). The software automatically searches
for the connected interface.
-
Then the data are read. After successful data transmission the information is depicted as a
chart. Under the menue point „File" > „Save" the transmitted data can be stored under an
arbitrary name. The file extension assigned by the program is „.RPP".
-
The table can be printed out with File > Print .
-
If the data are not depicted as a chart, it could be necessary to register a FlexGrid ActiveX-
Component.
Procedure:
- Copy the File msflxgrd.ocx from Program-directory to the windows system-directory
C:\windows\system32 .
Then register the component with
Start -> Run -> regsvr32 „C:\windows\system32\msflxgrd.ocx"
After successful registration, the message „ DllRegisterServer ... succeeded" appears.
Transfer data to the ROLAND control unit:
-
In order to reconstruct data use the function
„ RPP_Data" > „Write Roland device" .
Again the ROLAND control unit must be connected to the serial interface of the PC and has to
be in the parameter back-up mode. You are prompted to select an available file which will then
be transmitted to the control unit.
Help functions:
Under the menu point „Help" > „Info" you will find the ROLAND support address and the version number.
In case of difficulties please call the indicated telephone number. Note the version number displayed.
The menu point „Help" > „Connection" shows the required connecting cable.
The menu point „Help > Help (english)" shows this instruction.
Help > FAQ (english) shows how to register the ActiveX Component.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
B0048991

Advertisement

Table of Contents
loading

Table of Contents