Connection Of The Pw42Gs Sensor And The Sensor Cable - Roland udk20 Manual

R O L A N D
Page 54

5.2.6 Connection of the PW42GS sensor and the sensor cable

For the connection of the PW42AGS sensors the SCPWS-GG or SCPWS-GW can be used as in the
following picture.
Attention: The sensor cable is an active part of the sensor. The performance data
is therefore based on the compliance with cable specification.
Cable types for PW42AGS sensor (order data):
•
SCPWS-GG (straight cable socket on sensor side)
•
SCPWS-GW (90° angled cable socket on sensor side)
All cables have a straight cable plug on the side of the control unit. The standard length is 5 meter, longer
cables up to 50 meters must be ordered.
The sensor cables also serve as extension cables, without requiring separate "in-line quick disconnects".
Note: Cables should not be laid-out close to other cables showing interference
radiation (e.g. power cables), especially longer cables.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Picture: Connections of PW42GS sensor
B0048991