Table of Contents
Advertisement
R O L A N D
Rev. 1.0
The ENTER key leads to the following menu item:
Here the conductivity investigated for this program is shown (here: prog. 12)
Extra: = slightly magnetical NF material
FE = magnetical steel
For NF material the conductivity range is shown.
With the ENTER key and UP/ DOWN keys all programs can be polled / indicated.
The ENTER key will exit the section.
The UP key leads to the following menu item:
Here the nominal thickness for this program is shown (here: prog. 12).
With the ENTER key and UP/ DOWN keys all programs can be polled / indicated.
The ENTER key will exit the section.
The UP key leads to the following menu item:
Here the factor (2PW units: both factors) for this program, investigated on teach-in, is shown (here: prog.
12).
With the ENTER key and UP/ DOWN keys all programs can be polled / indicated.
The ENTER key will exit the section.
The UP key leads to the following menu item:
The ENTER key will exit the factor diagnostics.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
System param.:12
P12 LW:24-32mS/m
System param.:12
P12
System param.:12
P12
Picture: Indicating the factor for the program, investigated on teach-in
System param.:12
P12
Picture: Indicating the investigated conductance
N=2.12mm
Picture: Indicating the nominal thickness for the program
FKT=1.112
EXIT
Picture: Exiting the factor diagnosis section
Page 81
Advertisement
Table of Contents
