Table of Contents
Advertisement
R O L A N D
Rev. 1.0
5.2.7 Cable SVCPWS-SSBUDK10
The cable SVCPWS-SSBUDK10 is used for connecting the control unit to the Sensor Switch Box.
The following pin configuration and dimensions apply:
To control unit
Cable plug
Plug contact
∅22
1 white
2 green
3 brown
4 yellow
5 grey
Shield at plug enclosure
Note: For the connection of the SSBUDK10 to the sensor PW42AGS the SCPWS-
GG or SCPWS-GW are used.
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
51
Picture: Connections and dimensions of the SVCPWS-SSBUDK10 cable
To Sensor Switch Box
Cable receptacle
51
Receptacle contact
∅22
1 white
2 green
3 brown
4 yellow
5 grey
Shield at plug enclosure
Page 55
Advertisement
Table of Contents
