Table of Contents
Advertisement
R O L A N D
Rev. 1.0
12.3 Sensors and accessories
Order data
PW42AGS
SH42GS
SP42GS
SHS42GS
SHK
SHS42G-FB
2395045
2395046
2395110
2395109
12.4 Cables
Standard cable length is 5m. Customized lengts up to 50m can be ordered.
The following cables can be ordered.
Order data
SCPWS-GG
SCPWS-GW
SVCPWS-SSBUDK10
ROLAND ELECTRONIC GMBH · Otto-Maurer-Str. 17 · D-75210 Keltern · Telefon (0049) (07236) 9392-0 · Telefax (0049) (07236) 9392-33
OPERATING INSTRUCTIONS
DOUBLE SHEET DETECTOR R1000 UDK20
Description
Sensor 42 mm Ø, without cable, but with sensor plug for sensor cable connection,
sensor with threaded body M42 x 1.5 mm, 2 flat nuts
Spring loaded sensor bracket for direct installation of sensors with
thread body M42 x 1.5 mm
Suction cup
Spring loaded sensor bracket or direct installation of sensors with
threaded body M42 x 1.5 mm, with vacuum cup, without clamping bracket
Clamping bracket
Sensor bracket, spring suspended, with bellow suction cup, red, 45 Shore
Suction plate, for bellow suction cup, red, 45 Shore
Suction plate, for bellow suction cup, black, 60 Shore
Spare rubber lips for sensor bracket SHS42 or suction cup SP42
Spare rubber pad for suction cup SP42GS and for sensor bracket SHS42GS
Specification
Superflex-(C) Y PURKOMBI,
2
2 x 1 mm
+ 4 x 2 x 0,25 mm
Superflex-(C) Y PURKOMBI,
2
2 x 1 mm
+ 4 x 2 x 0,25 mm
Cable, 2 meters
Table: Order data sensors and accessories
Description
Cable for connecting sensor PW42AGS
2
to UDK20 or to SSBUDK10, both cable ends
with quick disconnect plug, straight cable plug
for connecting the control unit,
straight socket for connecting the sensor
Cable for connecting sensor PW42AGS
2
to UDK20 or to SSBUDK10, both cable ends
with quick disconnect plug, straight cable plug
for connecting the control unit,
right angle socket for connecting the sensor
Cable for connecting UDK20 to SSBUDK10,
both cable ends with quick disconnect plug,
straight cable plugs on both sides
Page 111
Table: Order data cables
Advertisement
Table of Contents
