Data Backup Via Serial Rs232-Interface (Only For C-Versions) - Roland udk20 Manual

B0048991 / Rev. 1.3
7.8

Data backup via serial RS232-interface (only for C-versions)

For better prevention against data loss, a data backup procedure is available for the system
configuration and the parameter sets. This is performed via the RS232-interface (only for C-
versions). The secured data can be tranfered to spare units in case of exchange after a failure.
The data backup is accomplished with the RPP-XP software available from ROLAND (for WinXP).
The procedure can be selected in the menu configuration. The following menu is displayed during
the data backup.
ParameterBack-Up
active
Fig. 75: Status of data backup
Pos: 59 /Kapitelübersicht/08. Betrieb @ 0\mod_1121422024046_501.doc @ 512 @ 1 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
Manual
Start-up
97