Table of Contents
Advertisement
To set up a shadow tour:
1. From the menu toolbar, click
2. Select the shadow tour from the drop-down list.
3. To record a new shadow tour, click
control panel to move the camera along the desired path.
4. Click
to save the shadow tour.
Note: The shadow tour can be overwritten.
5. Click
Exit
to return to live view.
To call up a shadow tour:
1. From the menu toolbar, click
2. Select the shadow tour from the list and click
the shadow tour.
3. Click
Exit
to return to live view.
V-stream encoding
The V-stream shows all camera channels within one camera tile. V-stream is only
available for remote use with the browser interface, mobile application, TruVision
Navigator or third party software implementation.
This feature is particularly useful if you have limited bandwidth available on a remote
location but still want to be able to view all camera tiles at once.
Note: It is not recommended to use the V-stream feature when a CVBS monitor is used
as a main monitor because the CVBS main monitor and the V-stream use the same
output.
To enable V-streaming:
1. Click the
Display Settings
2. Check
Enable V-stream
3. Select the desired settings for frame rate and maximum bit rate (Kbps).
4. Click
Apply
to save the settings and
To configure V-streaming:
The V-stream shows video on the recorder's BNC output.
1. Click the
Display Settings
BNC.
2. Under
Default
View, select the desired view format.
TruVision DVR 12HD User Manual
Camera Setup
and use the directional buttons on the PTZ
Camera Setup
>
V-stream
Encoding.
Encoding.
Exit
to return to live view.
>
Display
>
Video Output Interface
>
PTZ
Preset/Tours.
>
PTZ
Preset/tours.
to start the tour. Click
Chapter 10: Camera setup
to stop
and select
Main
75
Advertisement
Table of Contents
