Customizing A User's Access Privileges - Interlogix TruVision DVR 12 User Manual

Chapter 15: User management
To add new users:
1. Click the
User Management
2. Click to enter the Add User window.
Add
3. Enter the new user's name and password. Both the user name and password
can have up to 16 alphanumeric characters.
4. Select the new user's access level: Operator or Guest.
5. Enter the user's MAC address to let the user access the DVR from a remote
computer with this MAC address.
6. Click to save the settings and
Apply
7. Define the user's permissions.
Click the Permission button
window check the required access privileges for local, remote and camera
configuration. See "Customizing a user's access privileges" below for the
permission descriptions for each group.
Click to save the settings and
Apply
8. Click to return to live view.
Back

Customizing a user's access privileges

Only an administrator can allocate access privileges to Operator and Guest
users. The access privileges can be customized for each user's needs. The
administrator's access privileges cannot be changed.
There are three types of privilege settings: Local Configuration, Remote
Configuration, and Camera Configuration.
Note: Only the administrator can restore factory default settings.
Local configuration settings
Local Log Search: Search and view logs of the DVR.
•
Local Parameter Settings: Configure parameters and import the
•
configuration from the DVR.
Local Advanced Operation: Access HDD management (including the
•
initialization and modification of disk properties). Update system firmware as
well as stop the I/O alarm output.
Local Shutdown/Reboot: Shutdown or reboot the DVR.
•
110
icon in the menu toolbar to display its window.
to return to the previous window.
OK
for the new user. In the Permissions pop-up
to return to the previous window.
OK
TruVision DVR 12 User Manual