Applying Slot Number Labels And Color Identification Labels - Siemens SIMATIC ET 200S Operating Instructions Manual

4.10

Applying slot number labels and color identification labels

Introduction
● The slot number labels identify the individual I/O modules with a slot (1 to 63).
● The color identification labels permit individual color coding of the terminals in
● The slot number labels and color identification labels are applied onto the terminal
Requirements
● The terminal modules are installed.
● You can only fit the slot number labels when no electronics modules are installed.
● The terminal modules should not be wired when you apply the color identification labels.
Required tools
3 mm screwdriver (for removal only)
ET 200S
Operating Instructions, 08/2008, A5E00515771-06
accordance with company or national conventions. The color identification labels are
available in white, red, blue, brown, yellow, yellow-green, and turquoise. Each terminal on
the terminal module can be fitted with a color identification label.
modules.
– Position of the slot number plate: below the coding element on the terminal module.
– Position of the color-coding plates: directly next to each terminal on the terminal box.
4.10 Applying slot number labels and color identification labels
Installing
69