Figure 7-4: Load An Ini File Screen - Nortel MG 3200 Installation Manual

Fast Track Installation Guide
5. Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated
(following cmp file loading).
You can now choose to either:
Click Reset; the MG 3200 resets, utilizing the new cmp you loaded and utilizing the
current configuration files.
Click Cancel; the MG 3200 resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Back; the 'Load a cmp File' screen is reverted to; refer to
Click Next; the 'Load an ini File' screen opens; refer to
or any other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until 'FINISH').
6. In the 'Load an ini File' screen, you can now choose to either:
Click Browse and navigate to the ini file; the check box 'Use existing configuration', by
default checked, becomes unchecked. Click Send File; the ini file is loaded to the MG
3200 and you're notified as to a successful loading.
Ignore the Browse button (its field remains undefined and the check box 'Use existing
configuration' remains checked by default).
Ignore the Browse button and uncheck the 'Use existing configuration' check box; no ini
file is loaded, the MG 3200 uses its factory-preconfigured values.
You can now choose to either:
Click Cancel; the MG 3200 resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Reset; the MG 3200 resets, utilizing the new cmp and ini file you loaded up to now
as well as utilizing the other configuration files.
Click Back; the 'Load a cmp file' screen is reverted to; refer to
Click Next; the 'Load a CPT File' screen opens, refer to
file or any other auxiliary file listed in the Wizard is optional.
Version SN09

Figure 7-4: Load an ini File Screen

37
7. Software Update
Figure 7-2.
Figure 7-4. Loading a new ini file
Figure 7-2.
Figure 7-5; Loading a new CPT
August 2005