Table of Contents
Advertisement
Fast Track Installation Guide
5.
Load your previously backed-up ini file, or the default ini file (received with the software kit).
To load the ini file via the Embedded Web Server, refer to Section
3.3
Accessing the Embedded Web Server
To access the Embedded Web Server, take these 4 steps:
1.
Open a standard Web-browsing application such as Microsoft™ Internet Explorer™ (Version
6.0 and higher) or Netscape™ Navigator™ (Version 7.0 and higher).
2.
In the URL field, specify the IP address of the gateway (i.e.,
module of the MG 3200); the Embedded Web Server's 'Enter Network Password' screen
appears, shown in
3.
Enter the username (default: "Admin"), and password (default: "Admin"). Note that the 'User
Name' and 'Password' fields are case-sensitive.
4.
Click OK; the 'Quick Setup' screen is accessed, shown in
(SIP).
3.4
Configuring the MG 3200 Basic Control Protocol
Parameters
To configure the MG 3200 basic control protocol parameters use the Embedded Web Server's
'Quick Setup' screen.
•
For H.248, refer to Section
•
For SIP, refer to Section
When you have completed the above relevant section you are then ready to start using the MG
3200. For information on how to fully configure the VoIP gateway, refer to the MG 3200 User's
Manuals.
Tip:
Version SN09
Figure
3-2.
Figure 3-2: Embedded Web Server Login Screen
3.4.1
on page
3.4.2
on page
Once the gateway is configured correctly back up your settings by making a
copy of the VoIP gateway configuration (ini file) and store it in a directory on
your computer. This saved file can be used to restore configuration settings at
a future time. For information on backing up and restoring the gateway's
configuration refer to Section
http://10.1.10.10
Figure 3-3
24.
26.
5
on page 32.
23
3. Configuring the MG 3200
5
on page 32.
for the first
(H.248) and
Figure 3-4
August 2005
Advertisement
Table of Contents
