Rear Leds; Specifications, Safety, And Other Information - Nortel 2000 Hardware Installation Manual

Rear LEDs

Specifications, Safety, and Other Information

Figure 3 shows the LEDs on the back of the Application Gateway.
Figure 3 LEDs on the back of the Application Gateway
Ethernet transmit/receive activity LED: This LED is on each Ethernet
connector. When this LED is lit, it indicates that there is activity between
the server and the network.
Ethernet speed LED: This LED is on each Ethernet connector. When this
LED is lit, it indicates that the Ethernet network speed is 1 Gbps. When this
LED is off, it indicates that the Ethernet network speed is 10 Mbps or 100
Mbps.
For documentation specific to the IBM xSeries server, such as physical
specifications, safety information, rack mounting instructions, and
operating and environmental specifications, refer to the printed
information provided by IBM as well as the IBM xSeries Documentation
CD (provided with the server).
Chapter 1
Specifications, Safety, and Other Information
Application Gateway Hardware Installation Guide
Application Gateway Overview
5