4.2
Defining IP Parameters
The tables below detail the parameters that the customer must provide as preparation for
the installation procedures.
Note 1:
Note 2:
Note:
4.2.1
Gateway Addresses
If the network requires a Single IP configuration, use the Sincle IP Configuration column in
the table below. If the network includes 3 subnets , use the 3 Subnets - OAM, Media and
Control network columns in the table below:
Single IP
Network
Configuration
IP Address
Subnet Mask
Default Gateway
Router
Installation, Operation, Maintenance Manual
The tables in this section provide fields in which you can fill in the relevant
information.
A list of the MAC addresses of the systems' boards should be provided
with the product documentation. However, the MAC Address field in the
table below is provided for your convenience.
The PC should be in the same subnet as that of the Media Gateway 3500
components, that communicate with the PC.
Table 4-4: Gateway Addresses
3 Subnets
OAM Network
Media Network
52
Media Gateway 3500
Control Network
Document # LTRT-90704