Organisation Of The Ipsec Command Group - THOMSON SpeedTouch 608WL Configuration Manual

4.9 Organisation of the IPSec Command Group

Introduction
ipsec command group
Clear command group
E-DOC-CTC-20051017-0169 v0.1
In this section an overview is given of the IPSec Command Group structure.
Underlined keywords represent a command group. Other keywords are commands.
The ipsec command group comprises five main command groups and two
commands, as shown in the following tables. The table shows cross-references to
the structure tables of the individual command groups.
ipsec command group
clear
connection
debug
peer
show
config
flush
The following table shows the commands of the ipsec clear command group.
ipsec clear command group
all
session
Configuration via the Command Line Interface
See
" Clear command group" on page 157
" Connection command group" on page 158
" Debug command group" on page 158
" Peer command group" on page 159
" Show command group" on page 160
"4.8.1 Config Command" on page 152
"4.8.2 Flush Command" on page 155
Chapter 4
157