Chapter 4
Configuration via the Command Line Interface
4.7.7 Stop a connection
stop command
150
ipsec connection stop
The
Association. The IKE Security Association is not stopped with this command.
For clearing both the Phase 1 and 2 SAs, issue the ":IPSec clear session"
command.
Example
In this example the connection, named connect1, is stopped:
[ipsec connection]=>
[ipsec connection]=>stop
conn = connect1
:ipsec connection stop conn=connect1
[ipsec connection]=>
The result of this operation is verified with the commands of the
group.
command tears down the designated Security
E-DOC-CTC-20051017-0169 v0.1
show
command