Table of Contents
Advertisement
Chapter 3
Configuration via Local Pages
3.5.6 VPN-Server Page
VPN-Server
page layout
Server descriptor name
Virtual IP Range
Netmask
Primary DNS
88
The VPN-Server page allows you to define VPN Server Descriptors.
The configuration of a VPN server scenario is described in detail in section
"3.3 VPN Server" on page 63
Server Web page is the recommended way to configure a VPN server.
This name is used internally to identify the VPN Server Descriptor. This name
appears in the Client/Server list on the Peer Profiles page.
Specifies the range of IP addresses from which the VPN client addresses are
selected. An address range or a subnet can be entered for this parameter.
Specifies the netmask provided to the VPN client. Use the dotted decimal format.
For example: 255.255.255.0
Push IP
Select this check box when you want the VPN server to take the initiative for
assigning an IP address to the VPN clients via IKE Mode Config.
When the check box is not selected, the VPN clients will request an IP address from
the VPN server.
Domain
The domain name provided to the VPN clients via IKE Mode Config.
The IP address of the primary DNS server, provided to the VPN clients via IKE Mode
Config. This is the primary DNS server in the local network that is open to VPN
clients.
and following. The application-oriented VPN
E-DOC-CTC-20051017-0169 v0.1
Advertisement
Table of Contents
