Local ID
Remote ID
E-DOC-CTC-20051017-0169 v0.1
The Local ID identifies the local SpeedTouch™ during the Phase 1 negotiation with
the remote Security Gateway. This identity must match the settings in the remote
Security Gateway in order to successfully set up the IKE Security Association. The
Local ID types supported in the SpeedTouch™ are listed in the following table.
Local ID type
IP address
Fully qualified domain name
User fully qualified domain
name
Distinguished name
Key identity
any
For a VPN client/server connection between a SpeedTouch™ VPN client and
a Cisco IOS VPN server, select keyid as Local ID type. As Local ID value you
type the
user group
The Remote ID identifies the remote Security Gateway during the Phase 1
negotiation. This identity must match the settings in the remote Security Gateway in
order to successfully set up the IKE Security Association. The Remote ID types
supported in the SpeedTouch™ are listed in the following table.
Remote ID type
IP address
Fully qualified domain name
User fully qualified domain
name
Distinguished name
Key identity
any
Keyword
addr
fqdn
userfqdn
dn
keyid
any
name used in the Cisco configuration.
Keyword
addr
fqdn
userfqdn
dn
keyid
any
Chapter 3
Configuration via Local Pages
Examples
10.0.0.1
sales.corporate.net
john.doe@corporate.net
dc=corpor,uid=user
cisid
Examples
10.0.0.1
sales.corporate.net
john.doe@corporate.net
dc=corpor,uid=user
cisid
79