Peer Security Descriptor Parameters - THOMSON SpeedTouch 608WL Configuration Manual

4.3.1 Peer Security Descriptor Parameters

Parameter table
Example
Peer Descriptor name
[name]
E-DOC-CTC-20051017-0169 v0.1
The following table summarizes the parameters comprised in the peer security
descriptor. The table also indicates the keyword used in the CLI for each parameter:
Parameter
Cryptographic function
Key length
Hash function
Diffie-Hellman group
IKE SA lifetime
A Peer Security Descriptor is a text string, comprising the parameters described in
the table above. An example is shown here:
3DES MD5
Hash function
Cryptographic function
This name is used internally to identify the Peer Security Descriptor.
Configuration via the Command Line Interface
Keyword Description
Cryptographic function used for
crypto
encrypting the IKE messages
keylen Length of the cryptographic key.
Hashing function used for message
integrity
authentication
group Diffie-Hellman group for key exchange
The lifetime of the IKE Security
lifetime_secs Association. At expiration of this
period re-keying occurs.
MODEP1024
Diffie-Hellman group IPsec SA lifetime
Chapter 4
Lifetime 3600s
111