Chapter 4
Configuration via the Command Line Interface
4.2.2 List all Authentication Attributes
list command
106
ipsec peer auth list
The
authentication attributes.
Example
In this example, four attributes are shown:
cert1: completely defined authentication attribute using certificates
secret2: created, but not yet completely configured
secret1: completely defined authentication attribute using pre-shared key.
[ipsec]=>
[ipsec]=>peer
[ipsec peer]=>auth
[ipsec peer auth]=>list
[cert1]
Authtype
[secret2]
Authtype
[secret1]
Authtype
Secret
[ipsec peer auth]=>
command shows all previously created
: cert
: <unset>
: preshared
: ********
E-DOC-CTC-20051017-0169 v0.1